Close Window

ARINC 404 Tray Preference Selection Guide

Note: Standard off-the-shelf ARINC 404 trays can be modified. For special requirements such as shock or vibration isolation, non-standard tray lengths, alternate mounting hole patterns, cooling, air filtration or any other custom specifications, please complete the 404 Custom Tray Worksheet.

The ARINC 404 Tray Selection Guide will assist in generating the following Spec Number:

• 4
• -
•  
•  
•  
•  
•  
•  
•  

 

1	ARINC Tray Specification		Select Code
	ARINC 404		4
2	Tray Width		Select Code
	1/4 ATR		02
	3/8 ATR		03
	1/2 ATR		04
	3/4 ATR		06
	1 ATR		08
	1 1/2 ATR		12
3	Overall Tray Dimensions
	LRU Length	Tray Length	Select Code
	Short = 12.38	Short = 14.92	A
	Short = 12.38	Long = 20.06	B
	Long = 19.38	Long = 20.06	C
	Short = 12.38	X-Long = 21.92	D
	Long = 19.38	X-Long = 21.92	E
4	Hold Down Types		Select Code
	Front Insertion/Extraction		1
	Front Thumbscrew		2
	Front Insertion/Extraction and Rear Pin(s)		3
	Front Thumbscrew and Rear Pin(s)		4
5	Are Mounting Holes Required?		Select Code
	No		N
	Mounting Holes for No.6 Mounting Hardware		A
	Mounting Holes for No.8 Mounting Hardware		B
	Mounting Holes for No.10 Mounting Hardware		C
6	Tray Bottom		Select Code
	Flat		1
	Flat with Oval Cutout		2
	Deformation with Metering Plate		3
7	Tray Finish (Mil-C-5541)		Select Code
	Clear Chem-Film		C
	Gold Chem-Film		G
8	Connector Cutout		Select Code
	DPXB		1
	DPX2		2
	DPX3		3
	Black Plate for Rear Alignment Pins only		4

 

Contact Information

To submit this form, please enter the following information:

Required Fields *

Date Needed *
Quantity *
Contact Name *
Company Name *
Phone Number *
Fax Number
Email Address *
Comments
	Print Page